Polaris XP1000/ Turbo (2014-2018)

Polaris XP1000 (2014-2018)

Cage

Talk about working hard, the employees have been endlessly working to make sure to get cages made for the Polaris XP1000/Turbo so that we have them on hand and ready to ship next day. When Jeff is in design mode, his main goal is the safety of the riders so in the new design he found a more desirable material to make the cages with than the steel used in the older model cages. The High strength, low alloy steel (tensile strength ultimate 90,000 PSI yield strength 80,000 PSI) was picked for the durability of any situations you may get yourself into. The cage has angle gussets, cross bars and extra welds for guaranteed strength in every direction making the cage stronger than most on the market. Also, it has dual hoop designs that are located in the front of the unit and one over the driver’s head. The cage has built in seat harness tabs. In the event, that you do roll your machine, you will be confident knowing that you and your passenger will be safe. The cage is the most important part of the unit and the safety of you and your rider(s).


The Polaris XP1000 cage has a rear bumper that has been integrated to the cage to construct a stronger cage while keeping the sleek look of the design.
We powder coat to match exactly to your Polaris color scheme with color options of: Indy Red, Black Magic, Lime Squeeze, Sunburst Orange and Velocity Blue.


The new design is 4” lowered from factory and has a design that will have heads turning and your cage will be the conversation topic. Roof:
The roof for the cage is a black polyethylene roof with decals that are available and easy to apply. The roof has a light bar pocket cut so that you can install your light bar with ease.

Fitment:

( 2014-2018 )Polaris XP1000, Polaris XP Turbo, Polaris XP1000 High Lifter Edition, Polaris XP1000 Desert Edition, Polaris XP1000 4 Seater , Polaris XP1000 Turbo 4 Seater


XP1000 Cage

Tree Bars/ Tree Kickers

All Houser parts are made to protect your side by side and our tree bars do just that. The tree bars start at the front and go past the plastics to deflect objects towards the rear. Unlike other manufactures, we have designed the bars with an extra bar for extra side strength and stability so you can use the tree bars to pivot around trees or take side impacts without the stress of damaging your unit.  The Tree bars have our Patent Tree bar L bolt kit that comes with 6: threaded L hook bolts, M12X1.5 Nylon nuts and M6x1.25 flange bolts. With the Houser tree bars, you are going to experience so many things that other manufactures will not be able to stand up to. We pride our self on the strength and safety our tress bars bring to your unit. Again, we have all colors to match your color scheme to the exact color.  Lastly, we added a little fun to the tree bars/ tree kickers that no one else will have.  With our bottle opener on your tree bars you are sure to be the topic of discussion while helping your buddies open their bottles.

Fitment:

2014-2018

Polaris XP1000, Polaris XP Turbo, Polaris XP1000 High Lifter Edition, Polaris XP1000 Desert Edition, Polaris XP1000 4 Seater , Polaris XP1000 Turbo 4 Seater

2019

Polaris XP1000, Polaris XP Turbo, Polaris Turbo S


XP1000 2 Seater Tree Kickers

XP1000 4 Seater Tree Kickers

Front Lower A-Arms

These must have A-Arms should be on your unit for so many reasons.  If you compare our A-Arms to OEM, we have a maximum ground clearance bend 1.816” that gives you more confidence to ride over rocks and stumps that won’t leave you with broken A-Arms ruining your riding time. The A-Arms are easy to install, and bolt right on. Unlike most on the market, we provide you with all the hardware to install; Package includes 1 set of A-Arms, needle bearings, seals and heavy-duty ball joints. The A-Arms are made with high strength, low alloy steel that is 1.25” thick wall tubing, mandrel bent and work hardened.

Having Houser Racing A-Arms will save you time and money when you’re out for a good time riding. The durability of the A-Arms will not have you on the side on the trail worrying about replacing your A-Arms when you hit a rock or stump.

Fitment:

2014-2018

Polaris XP1000, Polaris XP Turbo, Polaris XP1000 High Lifter Edition, Polaris XP1000 Desert Edition, Polaris XP1000 4 Seater , Polaris XP1000 Turbo 4 Seater

XP1000 Lower A-Arms

Houser Sport Edition Front Bumper

Designed for reliability and safety of your unit, this Houser Racing Sport Edition Front Bumper is made from a high strength, quality tubing.  The bumper protects the front of the machine so you do not have the worry of damaging your plastics while on the trails. The Sport Edition Front bumper has large gussets for added strength and both sides have the “HR” logo. This was designed to be tucked in the front so that your tires hit before the bumper does when going on an incline. 

The bumper is easily installed and comes with all the hardware needed. The bumper has been designed to accommodate a light bar up to 14”. The light bar can be easily installed with two bolts. Also, we have a skid plate that is sold separately. It protects the bottom of the bumper and includes a D-Ring.

Fitment:

2015-2018

Polaris 900,Polaris 900XC, Polaris 900S, Polaris 1000S

2014-2018

Polaris XP1000, Polaris XP Turbo, Polaris XP1000 High Lifter Edition, Polaris XP1000 Desert Edition, Polaris XP1000 4 Seater , Polaris XP1000 Turbo 4 Seater


XP1000 Sport Edition Front Bumper

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s